Florida weather is tough on your outdoor surfaces. The sun, rain, and humidity can all cause damage. If you’ve got a beautiful paved patio or driveway, you want to keep it looking sharp. But how often should those pavers be resealed? Some need it every 2–3 years, but in some cases, you might need it much sooner. The key is knowing what to watch for.
Don’t wait for cracks or stains to show up. Call the best masonry contractor in Fort Pierce, FL, for a professional resealing assessment.
Top Brick Paving Services in Fort Pierce, FL
Phone: (772) 348-4353
How Often Should You Reseal Brick Pavers?
A general rule of thumb? Brick pavers should be resealed every two to three years. However, the exact timing depends on several factors:
- Foot traffic or vehicle use
- Exposure to direct sunlight
- Type of sealer used
- Drainage and elevation of the area
You may need to reseal your pavers more frequently, every one to two years, if they are near water, in direct sunlight, or receive a lot of wear.
When to Reseal: 3 Key Factors
1 – Climate Exposure
The frequent rains and salty air in Fort Pierce can speed up surface deterioration. If you live near the coast, you need to reseal every 2 years, while inland homes can often wait 3 to 4 years.
2 – Paver Material
- Clay pavers: Durable but porous. Reseal every 3 years.
- Concrete pavers: Less porous, but color fades faster. Reseal every 2–3 years.
- Natural stone: Varies by type. It’s best to consult a professional.
3 – Traffic & Use
High-traffic areas like driveways or walkways may need resealing every 2 years. However, patios and pool decks require resealing every 3 years to maintain their look and durability.
6 Signs It’s Time to Reseal
- Dull or faded color
- Feel rough or dry
- Visible stains or dirt
- Weeds between joints
- Mold or algae spots
- Water soaks in instead of beading
How Long Does the Sealing Process Take?
Depending on the weather and the size of the area, the actual sealing process usually takes one or two days. First, the pavers are pressure cleaned and fully dried. Then the sealant is applied evenly, often in two coats. After that, the area needs time to cure for 24–48 hours before it’s ready for foot or car traffic.
Long-Term Benefits of Regular Sealing
- Improved curb appeal
- Extended life of your pavement
- Lower maintenance costs
- Better protection from salt, sun, and moisture
- Keeps your outdoor area looking fresh
It is a small investment now that saves you from major repairs later.
DIY vs. Hiring a Pro
While it might seem like a simple DIY project, sealing brick pavers correctly takes experience. Professionals understand surface prep, application techniques, and which products perform best in Florida’s climate.
Hiring someone also saves time and headaches—especially if you’re dealing with large areas or pavers that have stains or uneven spots.
For expert brick paver sealing and masonry services in Fort Pierce, reach out to the most trusted brick paving contractor in Bradenton, FL.
📞 Call: (772) 348-4353
📧 Email: contact@fortpiercemasonrycontractors.com
Frequently Asked Question(s)
How do I know if my pavers were sealed before?
Pour a small amount of water on the surface. If it beads up, it’s sealed. If it soaks in quickly, it’s time for a new coat.
Can you seal over old sealer?
Yes, but only if the previous sealer is in good condition. Otherwise, stripping may be needed.
What’s the best time of year to reseal pavers in Fort Pierce?
Dry months like late winter or early spring are ideal since they avoid frequent summer rain.
Do I need to move furniture and plants before sealing?
Yes. To properly clean and seal the area, it must be clear.
